is a new OSRAM SIRIUS HRI 371 W lamp with high power, which is a necessary product forstage lighting.It has hybrid functions of spot wash and beam.It is equipped withrotated gobo wheel and color wheel. It can produce several lighting effects, such asgobo shake, rotation, rainbow, frost, focusing, zoom in/out, prism effect and so on.It has built-in program and auto-mode, easily for installation and transportation.It is fit for professional stage performance.
◈ Plastic Housing
◈ OSRAM SIRIUS HRI 371 W
◈ 2,000 Hour Average Life
※ PHOTOMETRIC DATA
◈ 400,000 LUX@5M
◈ 320,000 LUX@10M
◈ 209,000 LUX@15M
◈ 8-Prism and 24-Prism Effect, Prism Rotation
◈ Gobo Shake, Color Changing, Focusing, Frost
◈ Lamp On/Off
◈ Strobe/ Pulse: 1-10 times/S
◈ Dimming: 0-100% Linear Electronic
◈ Color Wheel With 14 Diachronic Colors Plus Open
◈ Split Colors
◈ Gobo Wheel
◈ Customizable/Fixed Gobos Plus Open
◈ DMX Channel Modes◈ 5 Button Control Panel
◈ LCD Menu Display
◈ 3pin DMX In/Out
◈100-240V AC, 50/60Hz
◈305W Power Consumption
◈ Length: 38cm
◈ Width: 27cm
◈ Height: 60cm
◈Packing: 1 in 1
◈Inner Package: Carton
◈Outer Package: Carton or Flight Case
◈ IP20 Rated
◈ High Bright OSRAM SIRIUS HRI 371 W
◈ Protocols/Functions: RDM
◈ Beam Angle 3°
◈ Keen Pan 540° and Tilt 270° Movement
◈ Rotated 8-Prism and 24-Prism With Speed Adjustable and Variable Direction
◈ Infinite Electric Focus With 2m Range, and Shutter With Variable Speed
◈ DMX, Master/Slave, Sound, and Auto With Built-in Programs, Stand-alone Mode
◈ Full Intellectualized Protective for High Temperature
and Resistance to Electronic Circuit.
Wireless Smart LED Lighting Control System
You can save up to 60% of lighting electricity usage with this wireless smart control system.
The wireless system consist of transmitting device that send out RF command to the load controllers,then the controllers perform the corresponding action according to the commands received .
1. Power Pack 0-10V dimming module: which control load according to radio frequency (RF) command sending from sensor or dimmer.
| 2. Wireless wall dimmer switch : which can be used to manually turn on/off and dimming up/down lights .|
Easy configuration for use as a handheld control or wall-mount control
3. Wireless PIR occupancy /vacancy sensor: which detect people movement to see if the space
is occupied,then send wireless command to dimming module to control the light on/off/dim automatically.
With magnet can be attached to iron shelf directly or Wall-mounted on any surface ( except metal and away from hot object )
Setup easily on surface buttons
4. Wireless manual controller: which can be used to manually turn on/off and dimming up/down lights . Surface mount 2-3m away from the window .
Where am I supposed to use the system ?
The wirelesss sytem is widely useful for any 0-10V dimming commercial light .
For office use , install the dimming module in the main junction box . ( 10A relay , which will be able to control 30pcs panel at one time ) , then you can put the sensor and dimmer anywhere in the room to control the lights .
For warehouse use , if you install wired sensor with each light , one light have to use one sensor , and the light structure have to be considered to install sensors , besides , if the sensor is broken , it will cost a lot to change it in the high ceiling , But with the wireless system , you can put the PIR sensor anywhere you can touch , and it will send command to dimming module 100feet away to control it , Also one dimming module can handle about 10pcs 300w high bay at one time .
Below is useful form recommended to design the lighting system you need .
What are the benefits to use this system ?
To distinguish from other sensing control products in the market , with our wireless system , you can
1. Extremely reduce overall labour and cabling cost due to wireless communication .
2. Greatly reduce the equipment cost , for example there are 5 lights in an office , you have to buy and install 5 wired sensors , but with our system , only need one dimming module ( load up to 10 Amp) + one or two sensor to have occupancy and daylight harvest function .
3. Highly enhance the stability of control system and reduce the maintenance cost in the future .
4. No damage to light fixtures to install the sensors , wireless system can be used for any kinds of lights , without considering light structures .
Is it easy to install and setup this system ?
It's quite easy to install the system , you need to install the Power Pack in the junction box , then collect all the 0-10V wire together from dimming driver to insert into the 0-10V terminal on the power pack . The next step is pairing the wireless switch or sensor with power pack , so they can "Talk " to each other .
Then you can control the lights with wireless dimmer switch and sensor .
FAQ about the wireless lighting control system
Vealite was founded in late 2009, started as a small trading company with electrcial background which integrated
plant with manufacturing, design and engineering in 2011 arppoved by SGS ISO9001.
We provide customized lighting product as LED light engine, special retrofit lamp/kit, Architectural lighting fixture and
Light control devices OEM/ODM service for US market.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.